b band, b-band preamp, preamps by b-band

stompbox

accessories

MP3/video

players

guitars

dealers

contact

home

B-BAND PRE-AMPS

B-BAND
____________

MORE
B-BAND
PREAMPS

TO ORDER OR BUY B-BAND PREAMPS - ENTER ONLINE SHOP

CLICK ON PRODUCT LINE FOR MORE INFORMATION

B-BAND A3T PREAMP

Manufacturers Details:
B-Band’s quality sound combined with a fast, responsive chromatic tuner. The A3T is new for 2007 but it still retains the simple and small features that are big on sound and intuitiveness. The compact preamp has a 4-band rotary EQ, low battery LED and a wide range chromatic tuner. The chromatic tuner is fast and has a range that will be welcomed buy customers that want to tune a full step down from standard- great for 12-string guitars too! The tuner will show all notes, including sharps, great for standard and open tunings.
A3T features:

* 4-band EQ
* HzzLess circuit for low noise and very high output
* Chromatic tuner
* Compact design
* HzzLess circuitry

* LINK TO B-BAND PICKUPS

B-BAND A5T PREAMP

Manufacturers Details:
The A5T has more features including a slider 4-band EQ and volume control, notch filter and frequency rotary controls, phase button, low battery-LED, and full range chromatic tuner. The fully chromatic tuner has an LED strip that shows the note and individual LED’s showing the half step, sharp, flat, and in-tune.
A5T features:

* 4-band EQ
* Slider controls
* HzzLess circuit for low noise and very high output
* Chromatic tuner
* Controls for feedback reduction
* Phase button
* Compact design
* HzzLess circuitry

* LINK TO B-BAND PICKUPS

B-BAND A7 PREAMP

Manufacturers Details:
The B-Band A7* sidemount preamp follows the design path of the popular B-Band A3.2 preamp as it has similar volume and 4-band EQ controls, but with sliders instead of rotary pots, and a battery LED indicator. This preamp has one input for B-Band UST or AST pickup and high-grade class A electronics.
The A7 dimensions allow for easy replacement of the smaller version of common old-style preamps. The battery compartment is conveniently mounted next to the controls for easy access and battery changes. All hardware mounting is included with the kit.
* LINK TO B-BAND PICKUPS

A7 Features:

* Single input (UST or AST)
* 4-band EQ
* Easy retrofit replacement installation
* Battery status LED
* Pre-wired high quality endpin output jack
* Average battery life 750 hours
* Faceplate battery compartment

A7 Specifications:

* S/N ratio: Greater thann -90 dB
* Distortion: 0.05 %
* Frequency response: 50 Hz - 40 kHz (+0, -3 dB)
* Low-cut slope: -6 dB/octave
* Input channel voltage gain: +24 dB
* Input impedance: 50 Mohm || < 10 pF
* Output impedance: < 3.5 kohm
* Bass control range: ±12 dB @ 70 Hz (± 3 dB @ 300 Hz)
* Middle control range: ±12 dB @ 400 Hz; (Q = 0.5)
* Treble control range: ±12 dB @ 2.5 kHz; (Q = 0.5)
* Presence control range: ±12 dB @ 12 kHz (± 3 dB @ 2.2 kHz)
* Nominal output level: -10 dB u (0.245 Vrms)
* Power supply: 9 V battery (not included)
* Current consumption: 0.8 mA typical
* Weight (with accessories): 115 g
* Dimensions: L 82 mm / 3.20", W 57 mm / 2.20", H 64 mm / 2.50"

B-BAND A8 PREAMP

Manufacturers Details:
The B-Band A8* follows the design path of the A4.2 as it has two inputs, for UST and AST, XOM** circuit and similar XOM mix, volume, 3-band EQ controls but with sliders instead of rotary pots. The A8 has a mono output and high-grade class A electronics. An input gain control for both UST and AST are easily accessible at the faceplate and there is a battery LED indicator.
The A8 dimensions allow for easy replacement of the smaller version of common old-style preamps. The battery compartment is conveniently mounted next to the controls for easy access and battery changes. All mounting hardware is included with the kit.
* LINK TO B-BAND PICKUPS

A8 Features:
* Dual channel input (UST and AST only)
* Exclusive B-Band XOM circuit
* XOM /UST slider mix control
* 3-band "graphic" slider EQ
* UST / AST input gain trims
* Master volume slider
* Easy retrofit replacement installation
* Faceplate battery compartment
* Battery status LED
* 250 hour average battery life
* High quality output jack
* Easy retrofit replacement preamp installation

A8 Specifications:
* Output impedance: < 3.5 kohm
* Nominal output level: -10 dB u (0.245 Vrms)
* UST channel input impedance: 50 Mohm
* AST channel input impedance: 50 Mohm
* UST channel voltage gain: 0 dB - +24 dB
* AST channel voltage gain: 0 dB - +24 dB
* Bass control range: Shelving ±12 dB @ 100 Hz (±3 dB @ 330 Hz)
* Middle control range: Peaking ±11 dB @ 1.1 kHz; (Q = 0.5)
* Treble control range: Peaking ±12 dB @ 12 kHz; (±3 dB @ 3.5 kHz)
* Both channels frequency response: 50 Hz - 40 KHz (-3 dB)
* Power supply: 9 V battery (not included)
* Current consumption: 0.8 mA typical
* Weight (with accessories): 115 g
* Dimensions: L 82 mm / 3.20", W 57 mm / 2.20", H 64 mm / 2.50"

B-BAND A9 PREAMP

Manufacturers Details:
The B-Band A9* sidemount preamp follows the design path of the famous B-Band A5 preamp as it has similar volume and 4-band EQ slider controls, notch filter and frequency, phase switch and a battery LED indicator. This preamp has one input for B-Band UST pickup and high-grade class A electronics.
The A9 dimensions allow for easy replacement of the bigger version of common old-style preamps. The battery compartment is conveniently mounted next to the controls for easy access and battery changes. All hardware mounting is included with the kit.
* LINK TO B-BAND PICKUPS

A9 Features:
* Single input for UST
* 4-band EQ
* Notch Depth and Frequency controls
* Phase switch
* Easy retrofit replacement installation
* Faceplate battery compartment
* Battery status LED
* Pre-wired high quality endpin output jack
* Average battery life 150 hours

A9 Specifications:

* Output impedance < 3 kohm
* Nominal output level: -10 dB u (0.245 Vrms)
* Input channel voltage gain: +24 dB
* Input impedance: 50 Mohm
* Bass control range: Shelving ±12 dB @ 70 Hz (± 3 dB @ 300 Hz)
* Middle control range: Peaking ±12 dB @ 400 Hz; (Q = 0.5)
* Treble control range: Peaking ±12 dB @ 2.7 kHz; (Q = 0.5)
* Presence control range: Shelving ±12 dB @ 10 kHz (± 3 dB @ 2.2 kHz)
* Notch frequency range: 100 Hz - 330 Hz
* Notch depth range: -15 dB (Q = 3.3)
* Frequency response: 50 Hz - 40 kHz (-3 dB)
* Power supply: 9 V battery (not included)
* Current consumption: 4 mA typical
* Weight (with accessories): 135 g
* Dimensions: H 100 mm / 3.90", W 63 mm / 2.50", L 63 mm / 2.50"

B-BAND A10 PREAMP

Manufacturers Details:
The B-Band A10* follows the design path of the A6.2 as it has two inputs, for UST and AST, XOM** circuit and similar volume, 3-band EQ and XOM mix slider controls, rotary controlled notch filter and frequency, phase switch and a battery LED indicator. The A10 has a mono output and high-grade class A electronics. An input gain control for both UST and AST are easily accessible at the faceplate.
The A10 dimensions allow for easy replacement of the bigger version of common old-style preamps. The battery compartment is conveniently mounted next to the controls for easy access and battery changes. All hardware mounting is included with the kit.
* LINK TO B-BAND PICKUPS

A10 Features:

* XOM circuit and mixer
* Dual input (UST / AST only)
* Dual input gain trims
* 3-band EQ
* Notch Depth and Frequency controls
* Phase switch
* Easy retrofit replacement installation
* Faceplate battery compartment
* Battery status LED
* Pre-wired high quality endpin output jack
* Average battery life 150 hours

A10 Specifications:

* Output impedance: < 3.5 kohm
* Nominal output level: -10 dB u (0.245 Vrms)
* UST channel input impedance: 50 Mohm
* AST channel input impedance: 50 Mohm
* UST channel voltage gain: 0 - +24 dB
* AST channel voltage gain: 0 - +24 dB
* Bass control range: Shelving ±12 dB @ 100 Hz (±3 dB @ 330 Hz)
* Middle control range: Peaking ±11 dB @ 1.1 kHz (Q = 0.5)
* Treble control range: Shelving ±12 dB @ 12 kHz (±3 dB @ 3.5 kHz)
* Notch frequency range: 100 Hz - 330 Hz
* Notch depth range: -15 dB; Q 3.3
* Frequency response: 50 Hz - 40 kHz (-3 dB) on both channels
* Power supply: 9 V battery (not included)
* Current consumption: 4 mA typical
* Weight (with accessories): 135 g
* Dimensions: H 100 mm / 3.90", W 63 mm / 2.50", L 63 mm / 2.50"

MORE B-BAND PREAMPS

A1.2 - A1.2N - A2.2